Lowrance fuel flow sensor for sale
Lowrance EP-60R Fuel Flow Probe With 10' Cable
Key Features mechanical fuel flow sensor
Cable Length: 10 ft.
Fuel Line Diameter: 3/8" (9.5 mm) Inside Diameter
Flow Rate Measured: Optimized for 0.6-45 Gal/hr. but can measure outside these values
Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr.; 1 PSI at 40 Gal/hr.
Installation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
Package: The EP-60R, LowranceNet T and 2 (two) 1" hose clamps
Fuel Type: Gasoline only. The EP-60R does not operate diesel engine fuel systems, or on any fuel system with a return fuel line or sump.
Hole required to route through a bulkhead: 7/8" (22mm)
Multiple EP-60R sensors possible: Yes (Up to 3 engines)
Evinrude E-Tec 40 HP to 90 HP - 2008 and newer
Evinrude E-Tec 115 HP to 300 HP - 2005 and newer
Honda Fuel injection models with NMEA Output - 40 HP and up
Mercury outboard Smartcraft compatible engine 2002 and newer - 40 HP and up
MerCruiser MPI/ECT Smartcraft compatible engine 2002 and newer
Suzuki DF200 to DF250 - 2004 & newer
Suzuki DF40 to DF300 - 2006 & newer
Yamaha Fuel injection models, 2006 and newer, 50 hp and up
Yamaha HPDI models, 2006 & newer, 150 hp and up