Lowrance making Honda Engine Management easy!

The Lowrance LMF maximises the usage of a Honda® engine management interface, by connecting to the NMEA 2000® network and a Honda outboard engine to enable real-time monitoring of crucial engine data. Sounds complicated, to achieve doesn’t it? But this connection is quick and easy, made possible by using just one cable that is attached from your Honda engine to the NMEA 2000 network.

Keeping an eye on speed, fuel rate, engine temperature, oil pressure, system voltage and engine hours, to name but a few features, can help ensure that your boat is not only performing to its full potential, but that engine warnings are heeded with speed and acted upon, ensuring journeys are smooth and trouble-free.

Having engine gauges available to see clearly from a Lowrance can also save the inherent cost of fitting individual display units and once again keep helm clutter to a minimum – particularly on smaller boats and RIBs where space is at a premium.

LOWRANCE LMF-200

Compact size fits 2-1/8" (55mm) diameter hole

Lowrance LMF-200 Compact Multi Function Gauge Without Sensor

Advanced multi-function, high-contrast round dot matrix gauge displaying graphic and numerical digital data. NMEA 2000® data communications compatible, and connect within an affordable, high-performance LowranceNET™ network to display real-time readings from an array of compatible electronic probes (E.P.s), like fuel flow, speed, mpg, fluid level, temp, and more!

Key Features

High-contrast dot matrix display with advanced LED backlighting

NMEA 2000® compatible for LowranceNET™ networking

Capable of configuring other Lowrance NMEA 2000 devices on the network bus

Capable of displaying the following NMEA 2000 data: paddlewheel speed, GPS speed, tachometer, battery voltage, alternator voltage, engine temperature, water pressure, engine oil pressure, fuel pressure, boost pressure, transmission oil pressure, atmospheric pressure, temperature, depth, engine loads, engine hours, fuel flow, fuel economy, fuel remaining, fuel used, fuel range, trip fuel used, seasonal fuel used, engine synchronizer, fluid level, GPS position, trim tab position, engine trim position, and engine alarms and warnings

Capable of showing data in the following page formats: single digital, dual digital, single analog, trim tab, engine diagnostics, engine trim, and engine synchronizer

Compatible with an array of electronic probes, including fluid level, temp, speed, and more

Capable of connecting to a remote speaker for alarms

Setting the Units

The change Units menu will allow you to set the unit of measure for volume to Gallons or Liters, and the speed to MPH, KMH or Knots.

This gauge will only work with a NMEA 2000 network and Faria KTF035.

It MUST be connected to a NMEA 2000 network or it WILL NOT function

Lowrance N2K-Exp-Rd-2 Network Starter Kit

The kit is used to start an NMEA 2000 network.

Individual parts to the network can be added as needed, such as sensors and displays.

Faria KTF035 HARNESS-ENG NMEA2K TO HONDA

Faria KTF035 HARNESS-ENG NMEA2K TO HONDA. (Equivalent to Honda part number 06328-ZZ3-760HE)

The Lowrance gauges with Honda interface cable can get the fuel flow information directly from the engine's computer.

HONDA BF - STARTING SERIAL NUMBER:

MPG-MPH / KPL-KPH SPEED ACCESSORIES:

Lowrance Point-1 GPS Antenna*

The Point-1 provides extremely accurate and rapid boat position and speed updates. In addition – unlike other position-only antennas – the Point-1 provides heading for accurate boat direction at any speed and for radar/chart overlay.

The Point-1 easily connects to any NMEA 2000® network.

*Note: The Lowrance Point-1 BAJA also includes an NMEA 2000 Network starter kit.

Lowrance EP-70R Speed Sensor

Paddle wheel water speed sensor.

Key Features

Cable Length: 18" from connector to smart module. 10 ft. from module to end of cable

Mounting Location: Transom

Hole required to route through a bulkhead:7/8" (22mm)

Package: The EP-70R and a LowranceNet T

Lowrance Ep-65R Fuel Level Probe With Cable

Fluid level sensor with 10 ft. cable. Includes N2K-T-RD (119-79)

Install yourself?

Lowrance systems are not difficult to install. Installing one requires only basic electrical skills, it's essentially "plug and play".